Import DXF DWG files to Cype3D

Import DXF DWG files to Cype3D


import DXF and DWG files to Cype3D for Structural and Analysis and Designs

CYPE 3D is an agile and efficient program brought about to carry out structural calculations in 3 dimensions of bars made up of steel, timber, aluminum, concrete or any other material, including the foundations with pad footings, piles and strap and tie beams. If the structure consists of timber, steel or aluminum bars, the program can redesign them and so obtain their maximum optimisation.

Read More
CYPE 3D Tutorial

CYPE 3D Tutorial


CYPE 3D
Power, efficiency and productivity for steel, timber, aluminium and
concrete structures

It is an agile and efficient program brought about to carry out the design of three dimensional structures composed of steel and timber bars, and their foundations, which includes pad footings, pile caps and strap and tie beams. Additionally, these can be redesigned and so obtain their maximum optimisation.

It has been adapted to national and international steel, timber, aluminium and concrete construction codes. The program carries out the analysis, design and check of the fire resistance of timber sections. Performs a seismic analysis of the structure (Modal Spectral Analysis) according to national and international codes. Second order effects (P-delta) are considered with wind and seismic loads.

Read More
Use Case: Fire Protection Design

Use Case: Fire Protection Design

This Use Case sets some guidelines so that any professional can develop a fire protection design in the most efficient way possible. In the following article we will explain the main advantages of working with the Open BIM methodology, the applications we have for the regulatory compliance of the different sections, and how to use the BIMserver.center platform.Profile: Fire Protection Engineer.Type of Project: Residential, Tertiary, Parking and Industrial.Project requirements: Basic project, technical project, annex of calculations of hydraulic networks, analysis of fire development, table of materials.

Project Creation

Architectural Model Development

modelo arquitectónico
Architectural model developed in Autodesk Revit.

BIMserver.center is the cloud storage platform from which to create, manage and share all our BIM projects. Its versatility allows you to start working from IFC Builder, Open BIM Plugin – Revit, IFC Uploader or CYPECAD MEP.

If you want to get more information about how to start working on a BIM project, you can check this article.

Fire protection design

CYPEFIRE Design

CYPEFIRE Design is designed to assist the designer in the process of designing and verifying the characteristics of the building and fire protection facilities.

The evacuation of occupants, the compartmentalization of the sectors and the accessibility of firefighters are some of the many checks that are carried out in the application.

It also serves as a starting point for the workflow, since from here requirements for the structure’s fire resistance, sprinkler installation, etc. are included.

CYPEFIRE Hydraulic Systems

CYPEFIRE Hydraulic Systems
CYPEFIRE Hydraulic Systems work interface

The requirement generation by CYPEFIRE Design of the sprinkler installation allows users who begin this phase of the project to know where the design is necessary.

CYPEFIRE Hydraulic Systems allows calculation and design of fire networks according to NFPA 13, EN 12845: 2016 and CP 52: 2004 regulations. The information provided to the BIM model on sprinkler arrangement will be of great help when we decide to perform the dynamic fire simulation.

CYPEFIRE Pressure Systems

Sistema de presurización
Assistant for the definition of a pressurization system

Fire smoke control is a fundamental part of being able to safely evacuate all occupants of the building.

To meet this need, CYPEFIRE Pressure Systems was born, an application for the design of staircase overpressure systems according to EN 12101-6.

The communication with the BIM model allows us to know which stairs require installation of this type. Also, the export of the calculation results allows dynamic simulation of the pressurized compartments.

CYPEFIRE FDS

Fire simulation in the parking lot of a residential building

Dynamic fire simulation is one of the most complex parts when designing a fire prevention project.

Thanks to all the information that has been included in the BIM project in the previous steps, we start with a great advantage since CYPEFIRE FDS is able to integrate the information of the BIM model, so that performing a simulation has never been so simple.

In addition to the workflow we also have CYPEFIRE FDS Viewer so that all project participants can view the results.

This is the end of the main workflow in the field of fire protection. But this Use Case does not end here, as there are many other applications whose use by designers is necessary to complete the final project.

Complementary Applications

CYPECAD

Structure fire resistance calculation

One of the best applications for the calculation and sizing of reinforced concrete structures and metal structures, CYPECAD also collaborates in the design phase of the fire project.

From CYPEFIRE Design, the information generated from the fire sectors and special risk premises is exported so that, comfortably, on the CYPECAD interface we have all the fire resistance requirements of the structure to be checked.

CYPELUX

Visualization of photometric curves in BIMserver.center

For the calculation of emergency lighting and evacuation means we have CYPELUX.

This free application allows the reading of fire fighting equipment (fire extinguishers, fire hydrants, alarm buttons) and the evacuation routes introduced in the project to perform the minimum lighting check.

The software is also parameterized, so we can easily modify the calculation criteria to adapt them to the regulations we want to comply with.

CYPEHVAC Ductwork

Calculation of the load losses produced in the ducts

The calculation and dimensioning of the duct networks that we carry out with CYPEHVAC Ductwork can be used to calculate the smoke control systems, for example, that are required to protect parking lots.

Through the simple interface, you can arrange all the air intake grilles and design the passage of the ducts, in order to obtain the necessary flow to meet the required fire protection conditions.

Open BIM S3F Signs

Signal introduction in Open BIM S3F Signs

For the final phases of the project, we have Open BIM S3F Signs, an application for the installation of signage according to the catalogues of the manufacturer S3F Signs.

The great versatility of the program allows users to read all the signals introduced in the fire protection or accessibility project, as well as to select any sign from catalogues, from countries such as Portugal, Spain, United Kingdom and France.

Alejandro Jorquera

Alejandro Jorquera

Graduado en Ingeniería Mecánica y especializado en el diseño de Protección Contra Incendios. Amante del fútbol sala y la NBA, le encanta disfrutar de su tiempo libre con los más cercanos.

Read More
Presentation IDEA StatiCA

Presentation IDEA StatiCA

Presentation IDEA StatiCA at Autodesk university in Las Vegas

Application IDEA StatiCa Connection can design all types of welded or bolted connections, base plates, footing and anchoring. It provides precise checks, results of strength, stiffness and buckling analysis of a steel joint. Bolts, welds and concrete blocks are checked according to EN/AISC/CISC/AU/SP 16/ Chinese/ Russian. Templates for most-used connections are available as well as wide range of predefined hot rolled and sheet welded members.

IDEA StatiCa in the global workflow

Do your project from scratch or build on geometry and loading imported from Robot, Revit, MIDAS Civil + Gen, STAAD.Pro, SAP 2000, Scia Engineer, RFEM, RSTAB,  AxisVM, ConSteel and others.

Take advantage of the link between IDEA StatiCa and Tekla Structures or Advance Steel to provide workshop drawings and support manufacturing process.

watch the Presentation IDEA StatiCA at Autodesk university in Las Vegas

Read More
Tekla Structural Designer

Tekla Structural Designer


Analyze and design buildings efficiently

Tekla Structural Designer is a revolutionary software that gives engineers the power to analyze and design buildings efficiently and profitably.  Fully automated and packed with many unique features for optimized concrete and steel design, Tekla Structural Designer helps engineering businesses to win more work and maximize profits. From the quick comparison of alternative design schemes through to cost-effective change management and seamless BIM collaboration, Tekla Structural Designer can transform your business.

Why users love Tekla Structural Designer:

  • Most-used BIM Software for structural analysis, design and drafting in Malaysia for RC, steel and composite structures.
  • Comprehensive foundations design and optimization. Eg. save time even on pile deviation.
  • Solve flat slabs, transfer beams, transfer slabs, podium levels easily in a single model

Key benefits

  • Achieve faster design times
  • Establish the best solution quickly
  • Manage changes easily
  • Maximize profitability and efficiency
  • Supports Eurocodes, US, Indian and Australian codes and British Standards

Read More
14 reasons why ADAPT ABI  is a good investment over other Bridge solutions…

14 reasons why ADAPT ABI is a good investment over other Bridge solutions…


Good for quick, fast preliminary design. Object Orientated Modeling allows user to model the bridge quickly as an assembly of Girder, Pier, Tendon etc. without specifying nodal coordinate and connectivity.

Affordable solution which fulfill almost all requirements of a Concrete Bridge with Segmental Construction

Accurate time dependent analysis including creep, shrinkage, PT losses, etc. ADAPT ABI accurately calculates effect of change of Tendon Forces over the time.

Easy to learn as opposed to mastering other Bridge solutions where you will be struggling (especially younger engineers) to come to grips with the software.

Can import AutoCAD drawings and using conversion tools generate cross sections, girders, piers, tendons, rebar, stays etc. quickly and assemble Bridge structure fairly quickly. One can even open a DWG file (any version) without having AutoCAD in his system using ADAPT-ABI, view or edit the drawing and save it back as DWG format compatible with any version of AutoCAD.

This program can easily handle all Bridge projects where the horizontal alignment is straight or having moderate curvature. Extended 2D (2.5D) solution gives a much faster processing speed compared to other solutions.

It can handle moderate curvature with simplified torsion calculations. By moderate curvature we mean horizontal offset between two successive piers in plan is less than 1/10th of distance between the piers.

Physical modeling of tendons is allowed as explicit object and thus get considered during analysis at the actual location as opposed to equivalent force taken by other programs. Almost all programs replace the tendon by an equivalent axial force along the cg line of the member to compute the results. However ADAPT ABI retains the position of tendon and obtains its force along Tendon line.

Automatic rigid link formation between deck and pier when it generates Input File.

This program can model travelers and handle construction sequences effectively.

User can model parts of deck as intended for casting and analyze the assembly as a composite section with differential creep and shrinkage pattern. It also allows user to model non linear variation of temperature gradient.

Using reference line allows users to model and modify bridge geometry with ease and also adjust travel path, loadings, tendons etc. accordingly.

Probably the only Bridge Solution which Generates Input File both in detailed format or in simplified format, which allows easy checking of input, better control and user can also modify the input quickly without struggling through complex Geometrical Model.

In built composite analysis algorithm allows user to model a combination of Precast and Cast in Situ Bridge Model accurately and check the result separately for different components or as a whole as Composite section.

Read More