
Any topology, any loading, in minutes! with IDEA StatiCa
Overall check for any connection in minutes.
Stress and strain analysis, stiffness, member capacity design, buckling, and design joint resistance.
Watch some of the Videos about IDEA StatiCa
Design of walls, beams, and details – reinvented!
Structural design and code-check of concrete walls, beams, and details of any topology. Thorough analysis and clear output in minutes!
Reinforcement and code-check of concrete walls, beams, and details
IDEA StatiCa Detail reinforces and checks all types of walls, beams, and details (in 2D) such as dapped ends, openings, hangings, brackets, diaphragms, frame joints and many more.
We provide clear pass / fail checks of ULS and SLS according to the code with complete report and bill of material. The most effective position of reinforcement is identified automatically. IDEA StatiCa Detail uses finite element analysis to break the limits of the standard design approach.
Non-linear analysis performed in the background.
Stress and strain determined by modified compression field theory.
Reinforcement results based on tension chord model.
Crack width and deflection checks. Compression softening.
Tension stiffening.
Results verified by ETH Zurich.


Steel connection design Reinvented!
The first software in the world which can design and check all steel connections and joints. Clear pass/fail checks according to the code for welded and bolted connections, footing, and anchoring.
Design and code-check of steel connections and joints
IDEA StatiCa Connection designs and checks welded or bolted connections, 2D or 3D joints, anchoring or footing of all topologies. We provide clear pass / fail checks according to EN/AISC/CISC/AU/SP 16 standards in a complete report with drawings. For analysis, the unique CBFEM method based on finite elements is used. Modeling considers an elastic-plastic material model for all the elements of the joint – plates, elements, bolts and welds. Prestressed bolts and plastic behavior of the welds are also taken into account.
Analysis of stress and strain of all connections and joints.
The load is applied in increments, the corresponding stress and strain is calculated and evaluated.
Linear analysis of stability of the connection elements.
The coefficient of critical load with the corresponding deflection shapes.
Rotational and axial joint stiffness (rigid, semi-rigid and pinned) and joint characteristics – initial stiffness.
Seismicity checks.
Iterative calculation of design load of the joint.
Design and code-check of reinforced concrete walls, beams, cross-sections and columns
Complex concrete details – corbels, hangings, dapped ends, openings, frame joints and diaphragms
All ULS and SLS checks according to Eurocode (application Detail also ACI)
Automatic detection of optimal reinforcement topology for walls and concrete details
Any geometry of cross-section; 40 predefined templates
Fire resistance check
Non-linear deflections; Crack and deflection checks also for walls
Compression softening. Tension stiffening.
Composite concrete-concrete sections
Fully customizable report with code references
BIM links with FEA software


Design and code-check of prestressed beams and cross-sections
Prestressing effects and losses
Any tendon topology
All ULS and SLS checks according to Eurocode
Pre/post-tensioned members, 3D beam
Non-linear deflections, short/long-term
Non-linear creep
Construction stages. Time-dependent analysis.
User-specified concrete strength in the stage of prestressing
Lateral stability check of beams
Any geometry of prestressed concrete cross-section; 40 predefined templates
Continuous composite beam
Includes all features of IDEA StatiCa Concrete
System requirements
Operating system
Minimum: Windows 8.1, 10 64 bit (necessary to update your Windows 8.1 or install Visual C++ Redistributable Package)
Recommendation: Windows 10, 64 bit
1.Working computer
Framework
Microsoft net Framework 4.7 or higher (download here)
Display Card
Minimum: Windows True Color display adapter with 1024×768 resolution
Recommendation: Single OpenGL 4.2 compatible graphics card with 8 GB RAM, up to 2560 x 1600 resolution
Note: Incorrect imaging may occur in the case of integrated graphics (INTEL chip)
Processor
Minimum: Intel Pentium 4 or AMD Athlon 64
Recommendation: Intel Core i7 or Core i5 processor and compatible
RAM
Minimum: 4 GB
Recommendation: 8 GB
Disk Space for installation – 0,5 GB
2.Server
Operating system
Minimum: Windows server 2012
Recommendation: Windows server 2019