Cype Software is launching a SERIES of Webinars on our BIM compliant solutions for both Structures and MEP.
We are also introducing 2 new applications which we are offering for free
CYPE has developed innovative solutions for over the last 30 years
Other than Bentley solutions we have introduced CYPE to Malaysia which has many advantages over Bentley.
CYPE developed over the last 30 years solutions for structures and MEP.
Cype has been providing CAD / BIM software solutions for three decades and we support more than 100,000 customers in 60 countries around the world and collaborate with more than 500 universities that incorporate our software in their academic and research functions. OpenBIM Systems has been developed for Fujitsu, Midea, Toshiba, S&P, Saint-Gobain etc.
This is the very old version of Cype.
the reason we uploaded it here is this software could do many type of structures and now it has more power and ability in the version of 2020.
CYPECAD was brought about to carry out the analysis and design of reinforced concrete and steel structures, subject to horizontal and vertical forces, for houses, buildings and civil work projects.
import DXF and DWG files to Cype3D for Structural and Analysis and Designs
CYPE 3D is an agile and efficient program brought about to carry out structural calculations in 3 dimensions of bars made up of steel, timber, aluminum, concrete or any other material, including the foundations with pad footings, piles and strap and tie beams. If the structure consists of timber, steel or aluminum bars, the program can redesign them and so obtain their maximum optimisation.
CYPE 3D Power, efficiency and productivity for steel, timber, aluminium and concrete structures
It is an agile and efficient program brought about to carry out the design of three dimensional structures composed of steel and timber bars, and their foundations, which includes pad footings, pile caps and strap and tie beams. Additionally, these can be redesigned and so obtain their maximum optimisation.
It has been adapted to national and international steel, timber, aluminium and concrete construction codes. The program carries out the analysis, design and check of the fire resistance of timber sections. Performs a seismic analysis of the structure (Modal Spectral Analysis) according to national and international codes. Second order effects (P-delta) are considered with wind and seismic loads.
BIMserver.center is the cloud storage platform from which to create, manage and share all our BIM projects. Its versatility allows you to start working from IFC Builder, Open BIM Plugin – Revit, IFC Uploader or CYPECAD MEP.
CYPEFIRE Design is designed to assist the designer in the process of designing and verifying the characteristics of the building and fire protection facilities.
The evacuation of occupants, the compartmentalization of the sectors and the accessibility of firefighters are some of the many checks that are carried out in the application.
It also serves as a starting point for the workflow, since from here requirements for the structure’s fire resistance, sprinkler installation, etc. are included.
CYPEFIRE Hydraulic Systems
CYPEFIRE Hydraulic Systems work interface
The requirement generation by CYPEFIRE Design of the sprinkler installation allows users who begin this phase of the project to know where the design is necessary.
CYPEFIRE Hydraulic Systems allows calculation and design of fire networks according to NFPA 13, EN 12845: 2016 and CP 52: 2004 regulations. The information provided to the BIM model on sprinkler arrangement will be of great help when we decide to perform the dynamic fire simulation.
CYPEFIRE Pressure Systems
Assistant for the definition of a pressurization system
Fire smoke control is a fundamental part of being able to safely evacuate all occupants of the building.
To meet this need, CYPEFIRE Pressure Systems was born, an application for the design of staircase overpressure systems according to EN 12101-6.
The communication with the BIM model allows us to know which stairs require installation of this type. Also, the export of the calculation results allows dynamic simulation of the pressurized compartments.
CYPEFIRE FDS
Fire simulation in the parking lot of a residential building
Dynamic fire simulation is one of the most complex parts when designing a fire prevention project.
Thanks to all the information that has been included in the BIM project in the previous steps, we start with a great advantage since CYPEFIRE FDS is able to integrate the information of the BIM model, so that performing a simulation has never been so simple.
In addition to the workflow we also have CYPEFIRE FDS Viewer so that all project participants can view the results.
This is the end of the main workflow in the field of fire protection. But this Use Case does not end here, as there are many other applications whose use by designers is necessary to complete the final project.
Complementary Applications
CYPECAD
Structure fire resistance calculation
One of the best applications for the calculation and sizing of reinforced concrete structures and metal structures, CYPECAD also collaborates in the design phase of the fire project.
From CYPEFIRE Design, the information generated from the fire sectors and special risk premises is exported so that, comfortably, on the CYPECAD interface we have all the fire resistance requirements of the structure to be checked.
CYPELUX
Visualization of photometric curves in BIMserver.center
For the calculation of emergency lighting and evacuation means we have CYPELUX.
This free application allows the reading of fire fighting equipment (fire extinguishers, fire hydrants, alarm buttons) and the evacuation routes introduced in the project to perform the minimum lighting check.
The software is also parameterized, so we can easily modify the calculation criteria to adapt them to the regulations we want to comply with.
CYPEHVAC Ductwork
Calculation of the load losses produced in the ducts
The calculation and dimensioning of the duct networks that we carry out with CYPEHVAC Ductwork can be used to calculate the smoke control systems, for example, that are required to protect parking lots.
Through the simple interface, you can arrange all the air intake grilles and design the passage of the ducts, in order to obtain the necessary flow to meet the required fire protection conditions.
Open BIM S3F Signs
Signal introduction in Open BIM S3F Signs
For the final phases of the project, we have Open BIM S3F Signs, an application for the installation of signage according to the catalogues of the manufacturer S3F Signs.
The great versatility of the program allows users to read all the signals introduced in the fire protection or accessibility project, as well as to select any sign from catalogues, from countries such as Portugal, Spain, United Kingdom and France.
Graduado en Ingeniería Mecánica y especializado en el diseño de Protección Contra Incendios. Amante del fútbol sala y la NBA, le encanta disfrutar de su tiempo libre con los más cercanos.
